Injection Cylinder (Welding Type)
Used for machine to make the activity like push/hit/pull etc.
The injection cylinder can provide the force to inject the plastic. The
cylinder diameter and rod diameter of the oil cylinder are not much different,
and the piston rod is welded into a whole with a hollow tube and a piston head.
The back cover and the cylinder barrel are also welded as a whole.
| Cylinder name | Bore range | Travel range | Rated pressure (Mpa) | Installation method |
| Injection cylinder (welding type) | 85～165 | 110～300 | twenty one | Flange |
1. Tie rod type, the front and rear covers are fixed by a tie rod. Limited by
the tie rod, it is generally suitable for small oil cylinders. Although the wall
thickness is the thinnest, under the same specification, the external dimensions
will be too large, and the space waste is serious.
2. Bolt type, the front and rear covers and the cylinder barrel are connected
by bolt groups. The required thickness of the cylinder is the largest, and the
raw materials are relatively wasteful. Generally suitable for large
cylinders.
3. Threaded type, the front and rear covers and the cylinder barrel have
large threads, and are connected by threads. The required thickness is smaller
than the bolt type, but it is still thicker, and a large nut is required to
ensure the assembly direction. Generally suitable for large long cylinders
4. Welding type, the back cover and the cylinder are welded into a whole, the
wall thickness of the cylinder is relatively thin, and the whole is relatively
compact. The material cost is not high, but the processing is the most difficult
and the processing cost is the highest.
Related products
-
Contact UsYOJU integrates R&D, design, manufacturing, and sales. YOJU products are widely used in the field of Single Axis Tracker, Multiple Points Single Axis Tracker, Solar Parabolic Trough, Linear Fresnel…
-
Contact UsWe are ATLAS COPCO OIS I-04 C80 VSD+ 1616772590 supplier and provide replacement parts for major air compressor manufacturers.
-
Contact UsThree-phase EI lamination is made by the silicon steel strip. The model of three-phase EI lamination is from three-phase(20) to three-phase(100), and the hole size is from Φ4.5 to Φ14. The gap sizes o
-
Contact UsSpecification: ASTM A790/A790M
Name: Duplex SS S32205 Seamless Pipe
Grade:S32205
Process: Seamless
Delivery Condiction:
1. Annealed, Pickled
2. Bright Annealed -
Contact UsWuxi Aojin Hydraulic Machinery Co., Ltd. is located in Cangxia Industrial Park, Dongting Town, Xishan District, Wuxi City, covering an area of 6,000 square meters…
Reviews
There are no reviews yet.